Bayville Chemical Supply Company Inc 70-G East Jefryn Boulevard Deer Park, New York, 11729 USA Telephone: 631-586-4309 Fax: 631-254-5591 E-Mail:
Bayville Chemical Supply Company Inc70-G East Jefryn BoulevardDeer Park, New York, 11729  USA           Telephone: 631-586-4309      Fax: 631-254-5591      E-Mail:





Ti-6Al-4V Titanium Alloy





Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability.

This alpha-beta alloy is the workhorse alloy of the titanium industry. The alloy is fully heat treatable in section sizes up to 15mm and is used up to approximately 400°C (750°F). Since it is the most commonly used alloy – over 70% of all alloy grades melted are a sub-grade of Ti6Al4V, its uses span many aerospace airframe and engine component uses and also major non-aerospace applications in the marine, offshore and power generation industries in particular.

Chemical Range for 6AL-4V

Element            Minimum           Maximum

Carbon                 --                    0.08

Nitrogen               --                    0.05

Hydrogen             --                    0.015

Iron                      --                     0.25

Oxygen                --                    0.2

Aluminum            5.5                   6.75

Vanadium            3.5                   4.5

Titanium               --                  Balance


Typical Mechanical Properties for 6AL-4V

Form                            Tensile Strength, min    Yield Strength, min   Elongation in 4D, min

Strip, Sheet and Plate

(ASTM B265)                           130 ksi                        120 ksi                     10%

Bar and Rod

(ASTM B348)                           130 ksi                        120 ksi                     10%


Typical Physical Data for 6AL-4V

Density                                            0.160 lb / cu. in.

Electrical Resistivity                         1.71 µohms-m

Thermal Conductivity                        6.6-6.8 W/mK

Modulus of Elasticity                       16.5 psi x 106

Melting Point                                   3200 °F

Specific Heat                                   0.135  btu/pound/°F

Modulus of Elasticity                       16.5 psi x 106

Applications: Blades, discs, rings, airframes, fasteners, components, vessels, cases, hubs, forgings. Biomedical implants.


Generally, Ti-6Al-4V is used in applications up to 400 degrees Celsius. It has a density of roughly 4420 kg/m3, Young’s modulus of 115 GPa, and tensile strength of 1000 MPa. By comparison, annealed type 316 stainless steel has a density of 8000 kg/m3, modulus of 193 GPa, and tensile strength of only 570 MPa. And tempered 6061 aluminum alloy has 2700 kg/m3, 69 GPa, and 310 MPa, respectively.

Where to Find Us:

Bayville Chemical
70 East Jefryn Boulevard
Suite G
Deer Park, NY 11729

Phone: 631 586-4309

What's New

New larger location

As of August 2014, we have moved to this new, larger, modern facility to better service your needs.


Like us on Facebook .

PrintPrint | Sitemap
© Bayville Chemical